Alleantia Industrial Intelligence · Machine connectivity

Machine connectivity for every brand and age

Alleantia connects PLCs, CNCs, robots and sensors of any brand and age, makes them speak the same language and delivers the data to MES, ERP and business applications. No coding, with the software installed in your factory.

Find the driver for your machine

  • 70+industrial protocols
  • 5,000+ready-to-use drivers

Already used by

What you get

From isolated machines to a single data stream

Every machine, new or old, speaks the same language and sends its data where it is needed.

New and older machines in the same project
  • PLCs, CNCs, robots and sensors of any brand
  • Including machines not designed for Industry 4.0
  • Hundreds of drivers for proprietary or serial protocols
Clean data, right in the factory
  • Acquisition, normalization and contextualization at the edge
  • A semantic model of your machines, reused for analytics
  • Automatic discovery of available variables
Data where you need it
  • MES, ERP, databases and IoT platforms with Connectors
  • REST and MQTT, including multiple destinations at once
  • Alleantia Core can also act as an OPC UA and Modbus server

How it works

From machine to your systems in three steps

The data then feeds Alleantia Insights, for KPIs, dashboards and analytics, and Alleantia Agents, to ask your factory questions in natural language.

Step 1

Install Alleantia Core

On a PC, industrial PC, gateway or Docker, in your own infrastructure.

How Alleantia Core works
  • Windows, Linux and Raspberry Pi
  • Docker, Cisco IOx and Azure IoT Edge
  • Installs in minutes
Step 2

Choose the driver

Look up your machine model in the Machine Drivers Library and the driver sets up communication on its own.

Find the driver for your machine
  • 5,000+ drivers for PLCs, CNCs, robots and sensors
  • Driver Editor for custom drivers
  • Custom development by the Alleantia team
Step 3

Choose the connector

Pick the target system and the data starts flowing.

Discover Connectors
  • MES, ERP and databases
  • REST and MQTT
  • Multiple destinations at the same time

Machine Drivers Library

Any brand, any protocol

Some of the drivers and standards ready to use. If your device is not listed, you can build it with the Driver Editor.

Siemens S7Fanuc FOCAS 2HeidenhainSiemens 840DMitsubishi MELSECOmron FINSABB IRC5Trumpf TruLaser and TruBendAtlas Copco Open ProtocolEuromap 63 and 77OPC UAModbus TCP and RTUMTConnectProfinet

Browse the Machine Drivers Library

Data sovereignty

Installed at your site. Your data stays yours.

Your machine data says a lot about how you work. With Alleantia it stays in your infrastructure.

Processing in the factory

Machine data is processed in the factory, before it leaves the plant.

Encrypted communications

All communications are encrypted with TLS 1.2 or higher.

Isolated environments

Support for air-gapped architectures in high-security environments.

Device identity

Integration with the Actalis Trusted IoT service for the digital identity of devices.

Automotive · Multi-plant connectivity

Cornaglia: mixed machines, one control room

Cornaglia Group supplies systems for the automotive, truck and off-road sectors, with 15 plants in 7 countries.

With Alleantia, together with TIM and Olivetti, the group collects data from all its machines, including those not designed for Industry 4.0, and monitors its plants abroad in real time from headquarters.

Read the case
  • 15plants in the group
  • 7countries
  • 1headquarters following production in real time

“Thanks to Alleantia, we were able to start extracting data from all industrial machines, even those not designed for Industry 4.0.”

Fabio Gerbo · CIO, Cornaglia Group

Getting started

How to start a machine connectivity project

Four steps, from the first machine to the whole plant.

  1. 01

    Take inventory

    Machines, controllers, protocols and age of every line: the basis for choosing the drivers.

  2. 02

    Check the drivers

    See in the Machine Drivers Library which ones are ready and which need to be created.

  3. 03

    Start with a pilot line

    Connect the machines on day one, validate the data and choose where to send it.

  4. 04

    Scale up

    Roll out to other departments and plants without starting from scratch.

Frequently asked questions

Machine connectivity at a glance

What is machine connectivity?

It means connecting production machines to business systems such as MES and ERP so that they exchange data automatically: machine states, process parameters, parts produced and alarms. With Alleantia Core it is done with ready-made drivers, without writing code.

Can I connect older machines or machines with proprietary protocols?

Yes. The Machine Drivers Library includes hundreds of drivers for older machines with proprietary or serial protocols. If a driver is missing, you can build it with the Driver Editor or have the Alleantia team develop it on request.

Do I need programming skills?

No. You choose the machine driver and the connector for the target system: configuration is done without writing code.

Which protocols and brands do you support?

More than 70 industrial protocols, including OPC UA, Modbus TCP and RTU, MQTT, Profinet and MTConnect, and more than 5,000 drivers for PLCs, CNCs, robots and sensors from brands such as Siemens, Fanuc, Heidenhain, Mitsubishi, Omron and ABB.

Where are the software and the data installed?

In your infrastructure: on a PC, industrial PC, gateway or Docker, with Windows or Linux. Data is processed in the factory, and isolated (air-gapped) architectures are also supported.

How does the data reach MES and ERP?

Through the Connectors of Alleantia Core: data reaches MES, ERP, databases and IoT platforms via REST and MQTT, including several destinations at once. Applications can also read it from Core acting as an OPC UA and Modbus server.

How long does it take to connect the first machine?

Alleantia Core installs in a few minutes and, with ready-made drivers, the first machines are connected on day one. You then extend to lines and plants without starting from scratch.

Let’s talk

Let’s get your machines talking

Book a demo with an Alleantia expert: we start from your machines and protocols and look at how to bring the data into your systems, in your infrastructure.

Book a demo

[email protected]·[email protected]·+39 050 9911933

A few minutes

Alleantia Core installed in your infrastructure, on PC, industrial PC, gateway or Docker.

First day

First machines connected with ready-made drivers, without writing code.

Then, the whole plant

Data from every line reaching MES, ERP and your business applications.